™Request a kitchen trial ↗

Foodservice / Non-food-contact cleaning

Commercial Kitchen
& Foodservice
Degreaser.

Hood filters, equipment exteriors and non-food-contact surfaces.

GreaseCheck is a water-based, neutral pH degreaser supplied by LKA Industrial Solutions Inc. for non-food-contact cleaning in commercial kitchens and foodservice facilities. Working solutions remove grease from equipment exteriors, exhaust hoods and removable filters. Match the dilution to the soil, rinse as directed and verify compatibility with each surface and finish.

Illustration of a gloved worker holding an aluminium hood filter above a stainless steel sink.
Foodservice / Hood filter maintenance
Working solution pH7.0–7.5
01 / CHEMISTRY7.0–7.5pH at working dilution
02 / FLASH POINTNoneAqueous solution · see SDS
03 / TRANSPORTDOT not regulatedProduct shipping classification
04 / WORKING SOLUTIONVOC below 0.5%As stated in the product TDS

Non-food-contact applications

Hoods, filters
and equipment exteriors.

Keep this cleaning scope separate from food-contact cleaning, sanitising and CIP.

01

Hoods & removable filters

Degrease accessible hood surfaces and removable filters. Check the filter material and manufacturer instructions.

Heavy Duty · 1:6 ↗
02

Equipment exteriors

Clean grease on fryer exteriors and compatible cooking equipment housings with the equipment shut down.

Heavy Duty · 1:6 ↗
03

Floors & waste areas

Routine cleaning of compatible tiled floors, walls and non-food-contact areas.

Multipurpose · 1:10 ↗

Dilution & yield

One concentrate.
Mix for the task.

Ratios are concentrate : water.
Add water first, then concentrate.

US gal
—US gal concentrate
+
—US gal water
7 galworking solution from
1 US gal concentrate

Final solution volume, not concentrate volume. Mixing assumes additive volumes. Follow the applicable TDS. Total job consumption depends on the deposit and cleaning method.

Hood filter cleaning

Remove. Clean. Rinse. Inspect.

01 / PREPARE

Shut down & remove

Follow the equipment procedure. Let the equipment cool, remove the filter and check material compatibility.

02 / CLEAN

Apply a 1:6 solution

Use a suitable wash container or cleaning area. The Heavy Duty TDS gives 1–3 minutes of contact time; agitate as needed.

03 / FINISH

Rinse & check

Rinse thoroughly, inspect for grease and allow the filter to drain and dry before reinstalling under the equipment procedure.

How long should a filter soak?

The published Heavy Duty TDS gives 1–3 minutes of contact time, not a universal long-soak schedule. Establish any extended immersion time through a compatibility and cleaning test.

Can it replace a sanitiser?

This page covers degreasing on non-food-contact surfaces. It does not establish disinfectant efficacy or sanitising approval. Keep your facility’s food-contact cleaning and sanitising procedures separate.

Operator protection

Use safety glasses and follow site PPE requirements. Gloves are recommended for prolonged or repeated contact. Avoid fine mist and provide ventilation when spraying. Do not infer freedom from skin or eye effects from neutral pH.

Technical documents

Check the data.
Choose the right sheet.

SDS and TDS for the concentrate and all three working solutions. PDFs hosted on greasecheck.com.

Working solution ratings do not replace the handling requirements for concentrate. Consult the sheet for the product you are using.

Commercial Kitchen Trial Request

Test it on your
next cleaning shift.

Tell us about your hood filters, equipment exteriors and cleaning method. Choose a representative area and compare the finished surface, cleaning time and rinsing.

01 Choose a non-food-contact test surface.

02 Record the dilution and cleaning method.

03 Compare the result with your current routine.

Complete the details below to prepare an email to our team. Send the message from your email app to submit your request.

Opens your email app with a draft. Your request is sent only when you press Send there. Prefer webmail? Copy the request below and send it to sales@greasecheck.com.

Copy request for webmail